(310) 878-0697Request an estimate

What affects the cost of new gutters in the South Bay

Updated · South Bay, Los Angeles

Short answer

The cost of new gutters in the South Bay depends mostly on the total length of the gutter runs, the number of stories, the metal (aluminum, steel or copper), the gutter size, the number of downspouts, and whether old gutters need to come off or fascia boards need repair first. Published 2026 Los Angeles averages put seamless aluminum gutters at $8 to $12 per linear foot installed and the average gutter installation at $1,093. Most whole-house installs come to $1,000 or more, so in California they must be done by a CSLB-licensed contractor.

Key takeaways

  • Linear feet of gutter is the biggest single factor, followed by height and access.
  • Aluminum is the most common and least expensive seamless option; copper costs the most and lasts the longest.
  • Six-inch gutters and larger downspouts cost more than 5-inch, and they're worth it on big or steep roofs.
  • Removing old gutters and repairing soft fascia adds to the job, and skipping fascia repair makes new gutters pull loose.
  • A fair written estimate lists feet, size, metal, downspouts, hangers, removal, fascia work and warranty terms.

The things that set the price

Length. Gutters are measured by the linear foot along each roof edge that needs one, and downspouts by the number and height of each drop.

Height and access. Second and third stories, steep hillside lots, tight side yards and landscaping under the eaves all add setup time and safety work.

Metal and size. Seamless aluminum is the usual choice. Steel is stronger but can corrode near the ocean once its coating is scratched. Copper costs the most, lasts the longest and is common on Spanish and Mediterranean homes. Six-inch gutters cost more than 5-inch but carry far more water.

Downspouts. More downspouts, larger downspouts and extensions that carry water away from the foundation each add to the job, and each pays off in drainage.

What's already there. Taking down and hauling away old gutters takes time. Soft or rotted fascia boards have to be repaired before new gutters can hold.

Published Los Angeles averages

Angi's 2026 Los Angeles cost data lists installed prices per linear foot of about $8 to $12 for seamless aluminum, $7 to $12 for sectional aluminum, $10 to $17 for galvanized steel and $30 to $40 or more for copper. The average gutter installation in Los Angeles is $1,093, with most homeowners paying $646 to $1,619. Gutter guards add about $7 to $15 per foot.

These are third-party averages, not our prices. Use the gutter cost calculator on this site to apply them to your feet of gutter, then get a written estimate for the real number.

Why online prices vary so much

National averages mix single-story homes with short, simple rooflines and large coastal homes with long runs, tile roofs, several stories and hillside access. South Bay homes often have more corners, more downspouts and more tile roofs than the national mix, so an accurate price depends on measuring the actual house.

What a fair written estimate should list

Total linear feet of gutter, gutter size and metal thickness, the number and size of downspouts, the type and spacing of hangers, removal and haul-away of old gutters, any fascia repair, and the warranty terms in writing. Comparing two estimates line by line is the easiest way to see whether they're quoting the same job.

The California license rule

Any home improvement or contracting job totaling $1,000 or more in labor and materials must be done by a contractor licensed by the Contractors State License Board. Most whole-house gutter installs are over that amount. You can look up a license number on the CSLB website before you sign.

Related questions

How are gutters priced?

Mostly by the linear foot of gutter, plus the number of downspouts. Height, access, metal, gutter size, removing old gutters and fascia repair all change the total.

Are seamless gutters worth the extra cost?

For most homes, yes. Each straight run is one piece, so the only joints are at corners and downspout outlets. Fewer joints means fewer leaks and less maintenance than sectional gutters.

Do I need a licensed contractor to install gutters in California?

Yes, when the job totals $1,000 or more in labor and materials, which most whole-house installs do. Ask for the CSLB license number and check it on the CSLB website.

Request an estimate for your property

Tell us the address and what you need done. We review the property and send a written estimate before anything is scheduled.

CallRequest an estimate