(310) 878-0697Request an estimate
Free tool · real NOAA storm data

Gutter size calculator: will your gutters overflow?

Pick your city, enter your roof size and pitch, and see whether your gutters can keep up with a hard South Bay downpour, what size you need, and how many downspouts.

Short answer

For many homes, yes. In a 10-year, 5-minute South Bay storm (3.06 to 3.52 inches per hour, depending on the city), a 5-inch K-style gutter can carry runoff from about 1,568 to 1,804 square feet of pitch-adjusted roof. A 2,000 square foot gable roof at average pitch sends about 1,100 adjusted square feet to each long gutter, which fits. Large or steep roofs often need 6-inch gutters.

The footprint of the roof seen from above, including overhangs. Not sure? Use your home's first-floor square footage plus about 10%.

Torrance design storm: 3.30 inches per hour for 5 minutes, the 10-year storm from NOAA. A rarer 25-year storm hits 4.06 in/hr.

Should keep up

Your 5-inch K-style gutter would run at 66% of its capacity in a 10-year storm, and 81% in a 25-year storm.

There's room to spare in a hard South Bay downpour.

  • Roof draining to your busiest gutter: about 1,000 sq ft, or 3,630 sq ft once pitch and rainfall are counted.
  • Recommended gutter: 5-inch K-style.
  • Downspouts on that side: at least 2 (2 × 3 inch rectangular). Your 2 should be enough.

This is an estimate from industry rules of thumb. A roof valley that dumps onto one spot, a gutter that's lost its slope, or debris can make a gutter overflow sooner than these numbers say.

Get gutters sized for your roof

Design storm by South Bay city

Rainfall intensity for a 5-minute burst of rain, from NOAA Atlas 14, at the center of each city. The last two columns show the most pitch-adjusted roof area one gutter run can carry in that city's 10-year storm.

South Bay rainfall intensity and gutter capacity by city
City2-year storm10-year storm25-year storm5-inch K-style6-inch K-style
Torrance2.09 in/hr3.30 in/hr4.06 in/hr1,673 sq ft2,412 sq ft
Redondo Beach1.96 in/hr3.07 in/hr3.76 in/hr1,798 sq ft2,593 sq ft
Manhattan Beach1.97 in/hr3.12 in/hr3.86 in/hr1,769 sq ft2,551 sq ft
Hermosa Beach1.94 in/hr3.06 in/hr3.76 in/hr1,804 sq ft2,601 sq ft
El Segundo2.09 in/hr3.30 in/hr4.06 in/hr1,673 sq ft2,412 sq ft
Palos Verdes Estates1.98 in/hr3.12 in/hr3.80 in/hr1,769 sq ft2,551 sq ft
Rancho Palos Verdes1.96 in/hr3.07 in/hr3.74 in/hr1,798 sq ft2,593 sq ft
Rolling Hills Estates2.11 in/hr3.32 in/hr4.08 in/hr1,663 sq ft2,398 sq ft
Lomita2.15 in/hr3.41 in/hr4.20 in/hr1,619 sq ft2,334 sq ft
San Pedro1.99 in/hr3.31 in/hr4.12 in/hr1,668 sq ft2,405 sq ft
Gardena2.12 in/hr3.38 in/hr4.15 in/hr1,633 sq ft2,355 sq ft
Carson2.21 in/hr3.52 in/hr4.33 in/hr1,568 sq ft2,261 sq ft

Source: NOAA Atlas 14, Volume 6, Version 2 (Precipitation Frequency Data Server), partial-duration series, downloaded 2026-11-18. Capacities from This Old House: How to Size Gutters and Downspouts.

How the calculator works

  1. Roof area per gutter. On a gable roof each long gutter takes half the roof. On a hip roof the long sides take about a quarter to three-eighths each; the calculator uses three-eighths to be safe. A shed roof sends everything to one gutter.
  2. Pitch. Steeper roofs catch more wind-driven rain, so the area is multiplied by a pitch factor: 1 for flat to 3-in-12; 1.05 for 4-in-12 to 5-in-12; 1.1 for 6-in-12 to 8-in-12; 1.2 for 9-in-12 to 11-in-12; 1.3 for 12-in-12 or steeper.
  3. Rainfall. That adjusted area is multiplied by your city's 10-year, 5-minute rainfall intensity from NOAA.
  4. Capacity. The result is compared with each gutter's rated capacity at 1 inch per hour: 5-inch K-style 5,520 sq ft, 6-inch K-style 7,960 sq ft, 5-inch half-round 2,500 sq ft, 6-inch half-round 3,840 sq ft.
  5. Downspouts. 1 square inch of downspout opening for every 100 square feet of roof, and at least two outlets on runs of 60 feet or more.

We call a gutter that runs at 80% of its capacity or less “should keep up,” 80% to 100% “right at its limit,” and anything above 100% “likely to overflow.”

Planning new gutters? Read what affects the cost of new gutters, or see seamless gutter installation.

Gutter sizing: common questions

Are 5-inch gutters big enough in the South Bay?

For many homes, yes. In a 10-year, 5-minute South Bay storm (3.06 to 3.52 inches per hour, depending on the city), a 5-inch K-style gutter can carry runoff from about 1,568 to 1,804 square feet of pitch-adjusted roof. A 2,000 square foot gable roof at average pitch sends about 1,100 adjusted square feet to each long gutter, which fits. Large or steep roofs often need 6-inch gutters.

When do I need 6-inch gutters?

When the roof area draining to one gutter, adjusted for pitch and rainfall, is more than a 5-inch gutter can carry. In the South Bay that's roughly above 1,568 to 1,804 adjusted square feet per gutter run. A 6-inch K-style gutter carries about 2,261 to 2,601.

How many downspouts do I need?

A common rule of thumb is 1 square inch of downspout opening for every 100 square feet of roof. A 2 × 3 inch downspout handles about 600 square feet of roof and a 3 × 4 inch about 1,200. Gutter runs of 60 feet or longer should have at least two outlets.

What rainfall does the calculator use?

NOAA Atlas 14's 10-year, 5-minute rainfall intensity at the center of each city, a short, hard burst of rain that a gutter should be able to handle. It also shows the rarer 25-year storm as a stress test.

Why do my gutters overflow even though they're the right size?

The usual causes are debris in the gutter or downspout, a gutter that has lost its slope or is sagging, a roof valley that pours a lot of water into one corner, or too few downspouts. Clearing and flushing the gutters fixes the first; the others need a repair or a resized gutter.

Want gutters sized for your roof?

We measure every run, size the gutters and downspouts for your roof and your city's storms, and send a written estimate before anything is scheduled.

CallRequest an estimate