(310) 878-0697Request an estimate
Installed by hand

Seamless gutter installation in the South Bay

New gutters measured to your house, formed in one piece for each run, hung on hidden hangers and sloped to the downspouts so the water actually leaves. Every install of $1,000 or more is done by a CSLB-licensed contractor, and the license number is on your written estimate.

Request an estimate

What we install

  • Seamless aluminum gutters
  • K-style and half-round
  • Copper and steel gutters
  • Downspouts and extensions
  • Gutter guards
  • Old gutter removal and haul-away

What seamless means

Seamless gutters are formed on site from a coil of metal, so each straight run is one continuous piece cut to the exact length of that wall. The only joints are at the corners and the downspout outlets. Fewer seams means fewer places to leak, which is why seamless aluminum is the most common choice for homes in the South Bay.

Sized and sloped to drain

Most homes use 5-inch K-style gutters. Large roofs, steep roofs and roof valleys that dump a lot of water into one spot often need 6-inch gutters and larger downspouts. Each run is pitched slightly toward its downspout so water doesn't sit, and downspouts are placed and extended so the water ends up away from the foundation, not against it.

Materials for coastal homes

Aluminum doesn't rust, which matters within a few miles of the ocean. Steel gutters are stronger but can corrode in salt air if the coating is scratched. Copper lasts the longest and weathers to a brown and then green patina, and it's the usual match for Spanish and Mediterranean homes. Copper and aluminum shouldn't touch each other or share fasteners, because the two metals corrode where they meet.

Tile roofs, hillsides and older fascia

On clay or concrete tile roofs, gutters are fastened to the fascia board without lifting the tile. Before new gutters go up, we check that the fascia is solid. Soft or rotted wood has to be repaired first, or the new gutters will pull loose. On hillside homes we look at where the water will go once it leaves the downspout, since it can end up in a neighbor's yard or undercut a slope.

What your written estimate should list

Linear feet of gutter, gutter size and metal, the number and size of downspouts, the hanger type and spacing, removal and haul-away of the old gutters, any fascia work, and the warranty terms in writing. If an estimate leaves these out, ask. It's the easiest way to compare two bids fairly.

The California license rule

In California, any job of $1,000 or more in labor and materials has to be done by a contractor licensed by the Contractors State License Board. Most whole-house gutter installs are over that amount. You can look up any license number on the CSLB website before you sign.

Gutter Installation across the South Bay

We do gutter installation in Torrance, Redondo Beach, Manhattan Beach, Hermosa Beach, El Segundo, Palos Verdes Estates, Rancho Palos Verdes, Rolling Hills Estates, Lomita, San Pedro, Gardena and Carson.

Gutter Installation: common questions

What are seamless gutters?

Gutters formed on site from a coil of metal, so each straight run is one piece cut to the length of the wall. The only joints are at corners and downspout outlets, which means fewer places to leak.

Should I get 5-inch or 6-inch gutters?

Five-inch K-style gutters fit most homes. Large or steep roofs, and roof valleys that pour a lot of water into one spot, often need 6-inch gutters with larger downspouts.

What gutter material is best near the beach?

Aluminum is the most common choice because it doesn't rust in salt air. Copper lasts the longest and suits Spanish-style homes. Steel is strong but can corrode near the ocean once its coating is scratched.

Can gutters be installed on a tile roof?

Yes. The gutters fasten to the fascia board, so the tile doesn't need to be lifted. The fascia has to be solid first, and any rotted wood is repaired before the gutters go up.

Does gutter installation need a licensed contractor in California?

Yes, when the job totals $1,000 or more in labor and materials, which most whole-house installs do. Ask for the CSLB license number and check it on the CSLB website.

Request an estimate for your property

Tell us the address and what you need done. We review the property and send a written estimate before anything is scheduled.

CallRequest an estimate